Skip to content
MatchBenchBY SMARTFACT

FREE BARCODE COMPARISON

How to check a run of labels against a master barcode

Updated

Checking labels against a master barcode means scanning one approved master label as the reference, then comparing every label in a run with it, character by character. MatchBench does this free in your browser: the master stays fixed until you change it, and each label shows Exact match or the first character that differs.

Free to use. No account, email address or trial. Works offline once prepared.

MatchBench showing Different value: 000017 differs from the current reference at character 1
A label that differs from the master, on a phone, handheld or scan station.
How to check a run of labels against a master barcode · 2:50 · Watch on YouTube

How does checking against a master work?

Scan the approved master label, or the job reference on the traveller, as the reference. It is kept exactly as entered, leading zeroes included. Then scan each label in the run: Exact match means every character is the same, and Different value shows the label's value and the position of the first character that differs. A barcode held in front of the camera counts once, so take it out of view before the next label.

MatchBench showing Exact match for a label checked against the master
A label that matches the master exactly.

What if the master changes partway through?

Change the reference. A new reference starts a new group, and earlier checks stay with the reference they were checked against, so the record of the run is never rewritten. A label that matched the old master now shows Different value against the new one.

MatchBench with REF-002 entered as the second reference
A new master starts a new reference group.

Can I keep a record of the run?

Yes. Every check stays in a list, newest first, with its reference, how it was entered and when. Download a CSV with the exact values, or an A4 PDF report that lists every reference group and check, for the shift lead to review. A project holds up to 10,000 checks and 1,000 references.

MatchBench review: 3 checked against 2 references, each check listed with its own reference
Each check stays with the master it was checked against.

What MatchBench does not do

A match shows that two values are identical. It does not show that the master is correct, that each scan was a different label or that a barcode is well printed: it is not a barcode verifier, and it does not interpret GS1 data. The report is a local record, not a signed approval, and one person works on one device, with no shared record.

WHO IT IS FOR

For packing bench leaders and quality staff who sample or check a run of printed labels against an approved master label or job reference.

WHY USE IT

A run of labels needs one fixed reference

When labels are checked against a master, the reference must not drift. In MatchBench the reference stays fixed until you deliberately set a new one. A new reference starts a new group, and earlier comparisons stay with the reference they were checked against, so the record of the run is never rewritten.

HOW IT WORKS

MatchBench in three steps.

  1. 01

    Scan the master once

    Scan the master label or job reference. It is shown as the reference group, with its value and how it was entered.

  2. 02

    Scan each label

    Scan each label in turn. A barcode held in front of the camera counts once, so take it out of view before scanning the next label. A keyboard scanner records one comparison per scan.

  3. 03

    Download the record

    The list shows the number of observations, exact matches and different values. Download a CSV with exact values, or an A4 PDF report listing every reference group and comparison.

A CONCRETE EXAMPLE

Twenty-four labels, one difference

A packer scans the master label P-20418-BLK, then 24 carton labels from the run. MatchBench shows 24 observations, 23 exact matches and 1 different value: P-20418-BRN, first difference at character 10. The PDF report lists every comparison with its source and time for the shift lead to review.

USED IN PRODUCTION

When label checks are part of every job.

MatchBench compares the values you scan, one label at a time. Two SmartFACT services work earlier in the job: choosing the right label data before it prints, and checking that the right components go into each kit. LabelRules starts with an invited trial and KitProof is in early access, with scope agreed with you for each.

Free tier

LabelRules

Checking a printed label against its reference finds a wrong value after it is printed. LabelRules works before printing: describe label rules in plain English, and approved rules select each job's layout, resolve customer codes and check required values before the label prints. LabelRules Free prints at an attended workstation; Pro adds connected triggers, routing and unattended printing.

Free tier

KitProof

MatchBench compares one value with one reference. When a kit needs the right components in the right quantities, KitProof turns approved plain English component rules into each kit's expected parts and quantities, then checks every scan against that plan before the kit leaves the bench.

BEFORE YOU START

Common questions.

Can I change the reference partway through?

Yes. Scan or enter a new reference, or choose Use as a manual reference on any comparison in the list. Either starts a new reference group. Earlier comparisons stay with their original reference, and a copied reference is recorded as manual.

Does the report prove the labels are correct?

No. It records which values were compared, with their entry source and the time on this device. It does not show that the master is correct, that each scan was a different physical label or that the barcodes are well printed. It is a local record, not a signed approval.

How many labels can one run hold?

A project holds up to 10,000 comparisons and 1,000 references, within 5 MiB of data. The PDF report is limited to 200 pages. If a report would be longer, MatchBench says so, and the CSV and project backup still contain everything.

What are the current limits?

MatchBench compares decoded text exactly. A match shows that two values are identical. It does not show that the reference is correct, that two different labels were scanned, what a carton contains or how well a barcode is printed: it is not a barcode verifier, and it does not interpret GS1 data. There is no list of expected pairs, no shared record and no sign-off, and one person works on one device. Each value can be up to 4,096 characters, with up to 10,000 comparisons, 1,000 references and 5 MiB of data in a project, and PDF reports up to 200 pages. The camera reads Code 128, QR Code, Data Matrix, EAN-13, EAN-8, UPC-A and UPC-E.

What happens to my data?

Your comparisons stay in this browser. They are kept in memory while the tab is open, or in this browser between visits if you choose Save on this device. The camera starts only when you open it, and images are decoded on your device, never stored or uploaded. Nothing you scan is uploaded, and no account or contact details are needed. Google Analytics is optional and loads only after you accept; it never receives barcode values, results or file contents. Change your choice with Analytics settings on these pages or in the tool; see /privacy/.

FREE TO USE

Put MatchBench to work.

Open the free tool and start with one known example.

Start a free comparison →